NitroTek
ESKY KOB 4CH CO-AXIAL RC HELI - 2.4GHZ VERSION
| 340mm | |
| 226g | |
| 415mm | |
| 77mm | |
| 174mm | |
| 2 x 180 | |
| 4Ch (includes training switch and simulator port. 2.4Ghz | |
| 4 in 1 (with gyro, mixer, ESC & receiver) | |
| 7.5g digital | |
| 7.4V 800mAh Li-polymer |
- ,
- ,
- Co-axial, counter-rotating double blades system. ,
- Easy to fly with simple operation, designed for beginners. ,
- Ready to fly out of box ,
- Digital servo with precise movements and sensitive reaction. ,
- Efficient, precise control. ,
- Simple structure of landing skid ensures convenient adjustment and easy maintenance. ,
- Complete package with everything included. ,
LowPriceRC
SANWA RX-1011FS FHSS-3 10CH 2.4G
,
1432 Sanwa RX-1011FS FHSS-3 10CH 2.4G Model Number: SAN-RX-1011FS The ...Hobby-Lobby
SPEKTRUM DX8 8CH TRANSMITTER W/AR8000
| Modulation | DSM2 |
| Band | 2.4GHz |
| Receiver | AR8000 |
| Programming Features | Airplane and Heli |
DX8 8Ch Transmitter w/AR8000 Highlights:, High-speed 11ms frame rate with 2048 resolution, Technical Specifications:, DX8 8Ch Transmitter w/AR8000 Specs:, Number of Channels, Model Memory:30, Modes:, Selectable 1, 2, 3 or 4,
Spektrum DX8 8Ch Transmitter w/AR8001 Combining Spektrum industry-leading 2.4GHz DSM ...Hobby-Lobby
ULTRACOTE PARKLITE WHITE
| If you need help, visit our UltraCote instructions page. Specs | Length |
| Width | 23.5 in. |
| Weight | 1.07 oz. per square foot |
| Application Temperatures | Adhesive activation |
At 200 degrees the adhesive on ParkLite becomes active, allowing the covering to be attached to the model. While 200 degrees will fully bond the to the model, it is well below the temperature that causes ParkLite to shrink. This is exactly what's needed when first attaching covering to the model to prevent the covering from distorting. Shrink Onset temperature - 280 degrees F, At 280 degree F ParkLite begins to shrink. This is called the shrink onset point. After the covering is attached using an iron set to 200 degrees F, the next step is to shrink the covering. This initial shrinking is done with the iron set at 280 degrees F. Maximum Shrinkage Temperature - 350 degrees F, At 350 degrees F, ParkLite reaches it's maximum shrinking point. Raising the temperature above this will not cause it to shrink more. This covering is not suitable for foam models because of the high shrinkage temperature., Please read the instructions included with each roll of ParkLite for the complete application instructions and pro-user tips., ,
UltraCote Parklite White Hangar 9 is bringing its UltraCote® line ...Hobby-Lobby
ULTRACOTE PARKLITE ORANGE
| If you need help, visit our UltraCote instructions page. Specs | Length |
| Width | 23.5 in. |
| Weight | 1.07 oz. per square foot |
| Application Temperatures | Adhesive activation |
At 200 degrees the adhesive on ParkLite becomes active, allowing the covering to be attached to the model. While 200 degrees will fully bond the to the model, it is well below the temperature that causes ParkLite to shrink. This is exactly what's needed when first attaching covering to the model to prevent the covering from distorting. Shrink Onset temperature - 280 degrees F, At 280 degree F ParkLite begins to shrink. This is called the shrink onset point. After the covering is attached using an iron set to 200 degrees F, the next step is to shrink the covering. This initial shrinking is done with the iron set at 280 degrees F. Maximum Shrinkage Temperature - 350 degrees F, At 350 degrees F, ParkLite reaches it's maximum shrinking point. Raising the temperature above this will not cause it to shrink more. This covering is not suitable for foam models because of the high shrinkage temperature., Please read the instructions included with each roll of ParkLite for the complete application instructions and pro-user tips., ,
UltraCote ParkLite Orange Hangar 9 is bringing its UltraCote® line ...Hobby-Lobby
ULTRACOTE PARKLITE OLIVE DRAB
| If you need help, visit our UltraCote instructions page. Specs | Length |
| Width | 23.5 in. |
| Weight | 1.07 oz. per square foot |
| Application Temperatures | Adhesive activation |
At 200 degrees the adhesive on ParkLite becomes active, allowing the covering to be attached to the model. While 200 degrees will fully bond the to the model, it is well below the temperature that causes ParkLite to shrink. This is exactly what's needed when first attaching covering to the model to prevent the covering from distorting. Shrink Onset temperature - 280 degrees F, At 280 degree F ParkLite begins to shrink. This is called the shrink onset point. After the covering is attached using an iron set to 200 degrees F, the next step is to shrink the covering. This initial shrinking is done with the iron set at 280 degrees F. Maximum Shrinkage Temperature - 350 degrees F, At 350 degrees F, ParkLite reaches it's maximum shrinking point. Raising the temperature above this will not cause it to shrink more. This covering is not suitable for foam models because of the high shrinkage temperature., Please read the instructions included with each roll of ParkLite for the complete application instructions and pro-user tips., ,
UltraCote ParkLite Olive Drab Hangar 9 is bringing its UltraCote® ...Hobby-Lobby
ULTRACOTE PARKLITE DEEP RED
| If you need help, visit our UltraCote instructions page. Specs | Length |
| Width | 23.5 in. |
| Weight | 1.07 oz. per square foot |
| Application Temperatures | Adhesive activation |
At 200 degrees the adhesive on ParkLite becomes active, allowing the covering to be attached to the model. While 200 degrees will fully bond the to the model, it is well below the temperature that causes ParkLite to shrink. This is exactly what's needed when first attaching covering to the model to prevent the covering from distorting. Shrink Onset temperature - 280 degrees F, At 280 degree F ParkLite begins to shrink. This is called the shrink onset point. After the covering is attached using an iron set to 200 degrees F, the next step is to shrink the covering. This initial shrinking is done with the iron set at 280 degrees F. Maximum Shrinkage Temperature - 350 degrees F, At 350 degrees F, ParkLite reaches it's maximum shrinking point. Raising the temperature above this will not cause it to shrink more. This covering is not suitable for foam models because of the high shrinkage temperature., Please read the instructions included with each roll of ParkLite for the complete application instructions and pro-user tips., ,
UltraCote ParkLite Deep Red Hangar 9 is bringing its UltraCote® ...Hobby-Lobby
BELI-ZELL CA, 20G BOTTLE
,
The all-rounder for everyday use BELI-CA Industrial grade for general ...Hobby-Lobby
BELI-ZELL CA MEDIUM, 20G BOTTLE
,
The all-rounder for everyday use BELI-CA Industrial grade for general ...Hobby-Lobby
BELI-ZELL CA 2, 5G BOTTLE
,
The all-rounder for everyday use BELI-CA Industrial grade for general ...Hobby-Lobby
MN48 MINI SERVO
| Bearing | Single |
| Bushing Or Bearing | Bearing |
| Gear Type | Plastic |
| Height | 1.02 in (25.9mm) |
| Length | 1.30 in (33.0mm) |
| Size Category | Minis and Micros |
| Speed (at 4.8V) | .15 - .19sec |
| Torque (at 4.8V) | 40 - 99 oz-in |
| Type | Analog |
| Weight | 0.8 oz (22.7g) |
| Width | 0.58 in (14.7mm) |
MN48 Mini Servo Highlights:, Ultra precise centering and movements, Technical Specifications:, MN48 Mini Servo Specs:, Application:, 20- to 40-size Aircraft, Speed:, 0.18 sec/60° @ 4.8V; 0.15 sec/60° @ 6.0V, Torque:, 48 oz-in (3.5kg-cm) @ 4.8V,
MN48 Mini Servo RC has never been more affordable to ...Hobby-Lobby
STANDARD WATERPROOF METAL GEAR SERVO
,
Standard Waterproof Metal Gear Servo These waterproof servos have what ...Hobby-Lobby
WATER PROOF DIGITAL SERVO
| Motor Type | 3 Pole |
| Bearing Type | Dual Ball Bearing |
| Speed (6.0V/7.4V) | 0.20 / 0.18 |
| Torque oz./in. (6.0V/7.4V) | 157 / 179 |
| Torque kg./cm. (6.0V/7.4V) | 11.3 / 12.9 |
| Size in Inches | 1.65 x 0.83 x 1.57 |
| Size in Millimeters | 41.8 x 21.0 x 40.0 |
| Weight in ounces | 2.15 |
| Motor Type | 3 Pole |
| Bearing Type | Dual Ball Bearing |
| Speed (6.0V/7.4V) | 0.20 / 0.18 |
| Torque oz./in. (6.0V/7.4V) | 157 / 179 |
| Torque kg./cm. (6.0V/7.4V) | 11.3 / 12.9 |
| Size in Inches | 1.65 x 0.83 x 1.57 |
| Size in Millimeters | 41.8 x 21.0 x 40.0 |
| Weight in ounces | 2.15 |
Weight in grams.:61, Technical Specifications:, Digital Waterproof Servo, Weight in grams.:61,
Water Proof Digital Servo Our new waterproof servos have what ...Hobby-Lobby
MC35 MICRO SERVO
| Size Category | Minis and Micros |
| Type | Analog |
| Length | 1.12 in |
| Width | 0.50 in |
| Height | 1.17 in |
| Weight | 17.0 g (0.6 oz) |
| Bushing Or Bearing | Bushing |
| Gear Type | Nylon |
Technical Specifications:, MC35 Micro Servo Specs, Torque:, 30 oz/in @ 4.8V, 35 oz/in @ 6.0V, Speed:, .21/60 @ 4.8v, .17/60 @ 6v, Application:, Small engines, Electric powered,
High level performance with a budget friendly price RC has ...Hobby-Lobby
DX5E 5-CHANNEL TRANSMITTER ONLY MODE 2
| DX5e 5-Channel Transmitter Only Mode 2 Specs | Channels |
| Modulation | DSM2/DSMX |
| Band | 2.4GHz |
| Programming Features | Delta Wing; HI/LO rates |
| Transmitter (Tx) Battery | 4 AA Alkaline batteries (included) |
| Modes | Mode 2 |
Model Memory: 1, ,
Now, 2.4GHz DSMX technology and affordability come together Spektrum introduces ...